Cisco 350-080 Exam Syllabus Topics:

Cisco CCIE Data Center Written Sample Questions:

1. What tasks can only be performed in the default or admin VDC?

A) EPLD upgrade, Cisco IOS ISSU, FCoE feature enablement, CoPP configuration and SNMP configuration
B) EPLD upgrade, IOS ISSU, FcoE feature enablement, CoPP configuration, and rolling back a checkpoint
C) EPLD upgrade, Cisco IOS ISSU, FCoE feature enablement, CoPP configuration, and write erase
D) EPLD upgrade, Cisco IOS ISSU, FCoE feature enablement, CoPP configuration, and ACL capture enablement

2. Refer to the exhibit.

What is the most likely reason that VSAN 88 is initializing?

A) The VSAN is shut down.
B) VSAN 88 is not mapped to a FCoE VLAN.
C) No host has logged into the VSAN.
D) VSAN 88 is not part of the trunk yet.

3. A customer would like to monitor traffic that is being sent to a specific virtual machine named VM001 using SPAN. The customer has another virtual machine configured as a sniffer host called VM002. What configuration is required, and what other changes will need to be made? (Choose two.)
VSM-PRI-188# 71thern vethernet 5 Vethernet5 is up Port description is VM001, Network Adapter 2 HardwarE. Virtual, address: 0050.56b0.001e (bia 0050.56b0.001e) Owner is VM "VM001", adapter is Network Adapter 2 Active on module 5 Vmware DVS port 484 Port-Profile is VM-vlan-10
Port mode is access
VSM-PRI-188# 71thern vethernet 6
Vethernet6 is up
Port description is VM002, Network Adapter 1
HardwarE. Virtual, address: 0050.56b0.0020 (bia 0050.56b0.0020)
Owner is VM "VM002", adapter is Network Adapter 1
Active on module 5
Vmware DVS port 485
Port-Profile is VM-vlan-10
Port mode is access

A) Restart the VEM on module 5
B) Monitor session 1 type span Source interface veth5 both Destination interface veth6 No shut
C) monitor session 1 source vlan 10 destination interface veth6 no shut
D) VM002 must be removed from the Nk1V
E) monitor session 1 type er-span source interface vlan 10 destination ip 10.1.1.10 no shut
F) Move VM002 to Module 5

4. The OTV overlay interface is a logical multiaccess and multicast-capable interface that must be explicitly defined by the user, and is the location where the entire OTV configuration is applied. Which two statements about the OTV overlay interface are true? (Choose two.)

A) The OTV edge device performs the dynamic OTV encapsulation on the Layer 2 packet and sends it to the overlay interface toward the routed domain.
B) The OTV edge device performs the static OTV encapsulation on the Layer 3 packet and sends it to the join interface toward the switching domain.
C) The OTV edge device performs the dynamic OTV encapsulation on the Layer 2 packet and sends it to the join interface toward the routed domain.
D) When the OTV edge device receives a Layer 2 frame that is destined for a remote data center site, the frame is logically forwarded to the overlay interface.
E) When the OTV edge device receives a Layer 2 frame that is destined for a remote data center site, the frame is logically forwarded to the join interface.

5. How many ACL capture sessions can be configured on a Cisco Nexus 7000 switch?

A) Only one ACL capture session is supported per VLAN.
B) ACL capture is not supported on the Cisco Nexus 7000 switch.
C) The number of ACL capture sessions depends on the space that is available within the ACL Ternary Content Addressable Memory.
D) Only one ACL capture session can be active at any given time in the system across virtual device contexts.
E) Only one ACL capture session can be active in each virtual device context.

Solutions: