EMC D-PSC-MN-23 Exam Syllabus Topics:

EMC Dell PowerScale Maintenance 2023 Sample Questions:

Question #1
A platform engineer is unable to join a Dell PowerScale node to an existing SmartLock compliance mode cluster.
What is the reason for this issue?

A. Node was not rebooted into compliance mode before trying to join.
B. Node is a Gen 6 node, which is not compatible with compliance mode.
C. Node is an F-series node, which is not compatible with compliance mode.
D. OneFS version of the existing cluster is 6.

Question #2
When integrating PowerScale with cloud environments, what factors need to be considered for data tiering?

A. Cloud storage costs
B. Data access frequency
C. Bandwidth limitations
D. Compliance requirements

Question #3
A Dell PowerScale Gen 6 chassis is being installed. The chassis has been aligned with the rails.
What is the correct order of steps to finish the installation?

A. 1. Secure the lift casters on the floor.
2. Slide the first few inches of the back of the chassis onto the supporting ledge of the rails.
3. Release the lift casters and carefully slide the chassis into the cabinet as far as the lift allows.
4. Push the node off the lift arms and into the rack.
5. Install two mounting screws at the top and bottom of each rail to secure the chassis to the rack.
B. 1. Push the node off the lift arms and into the rack.
2. Release the lift casters and carefully slide the chassis into the cabinet as far as the lift allows.
3. Install two mounting screws at the top and bottom of each rail to secure the chassis to the rack.
4. Slide the first few inches of the back of the chassis onto the supporting ledge of the rails.
5. Secure the lift casters on the floor.
C. 1. Install two mounting screws at the top and bottom of each rail to secure the chassis to the rack.
2. Release the lift casters and carefully slide the chassis into the cabinet as far as the lift allows.
3. Secure the lift casters on the floor.
4. Slide the first few inches of the back of the chassis onto the supporting ledge of the rails.
5. Push the node off the lift arms and into the rack.
D. 1. Release the lift casters and carefully slide the chassis into the cabinet as far as the lift allows.
2. Push the node off the lift arms and into the rack.
3. Install two mounting screws at the top and bottom of each rail to secure the chassis to the rack.
4. Slide the first few inches of the back of the chassis onto the supporting ledge of the rails.
5. Secure the lift casters on the floor.

Question #4
Before performing hardware maintenance on a PowerScale node, why is it important to document the existing cabling setup?

A. To ensure cables can be reconnected correctly
B. To maintain airflow management
C. To identify potential cable degradation
D. To facilitate future upgrades

Question #5
When cabling nodes, what practices should be followed to ensure a successful PowerScale installation? (Select two)

A. Using cables of standardized lengths to reduce clutter
B. Testing each cable for connectivity and signal integrity
C. Implementing structured cabling that adheres to industry standards
D. Labeling each cable according to its connection points

Solutions: